text.skipToContent text.skipToNavigation
Need help? Please contact us

Limulus Amebocyte Lysate (LAL) Assays

Lonza offers three types of LAL assays each with their own unique benefits – the gel clot LAL assay, the kinetic turbidimetric LAL assay and the kinetic chromogenic LAL assay. 

Request information

Choosing a LAL assay

The gel clot LAL assay is a simple, qualitative LAL test that is performed in tubes that are placed in a water bath or heat block. After a one-hour incubation period, the tubes are inverted. A firm clot that remains at the bottom of the tube indicates a positive reaction. 

There are two types of kinetic LAL assays available – kinetic turbidimetric and kinetic chromogenic. Both kinetic LAL assays are quantitative and are conducted in a 96-well plate using an incubating absorbance plate reader with supporting software. For both kinetic LAL assays, a sample is mixed with LAL reagent and the reaction is automatically monitored overtime for the appearance of turbidity or a yellow color. The time required for the change is inversely proportional to the amount of endotoxin present.

Choosing the best LAL assay (or assays) for your QC lab may seem unclear but rest assured we are here to help. LAL assay selection is often dependent on several factors including type of result required, test volume and sample type. Lonza offers several resources to help determine which assay is best for you like our Assay Selection Guide and our presentation ‘Endotoxin Detection - Which Method is Best for Me?’. We also have a dedicated Scientific Support Team with over 40 years of experience ready to answer your questions and guide you every step of the way. 

For those laboratories looking to adopt a sustainable, recombinant endotoxin detection method, we have a solution. The PyroGene® Recombinant Factor C Assay is not reliant on a natural resource (horseshoe crab blood) and is proven to be equivalent to the LAL methods. 


LAL assays at a glance

  
LAL assay type Result type Trendable data Automation-compatible Prone to interference Equipment/software investment
Kinetic chromogenic Quantitative Yes Yes + +++
Kinetic turbidimetric Quantitative Yes Yes ++ +++
Gel clot Qualitative No No ++ +

Kinetic Chromogenic LAL Assay

The key methodological principle of chromogenic assays is to reveal the presence of the analyte in a test sample via chemically-induced visible color changes. The resulting color is then measured using spectrophotometric methods to reveal the concentration of the analyte in the sample.

This method forms the basis of the chromogenic LAL assay. The LAL reagent is mixed with a chromogenic reagent (a peptide connected to p-nitroaniline, a yellow colorant) to produce a synthetic chromogenic substrate. This is added to the test sample to create the test solution, which is then incubated.

If endotoxins are present in the sample, the subsequent enzymatic reactions of the LAL reagent break the peptide bonds connected to the p-nitroaniline molecules, releasing the yellow color into the solution. The more endotoxin present, the more yellow the solution will become. This can be quantitated using an absorbance plate reader to reveal the specific endotoxin concentration. 

Assay principle

When endotoxin binds to Factor C, Factor B is activated that cleaves the proclotting enzyme into its active form. The resulting clotting enzyme will cleave the chromogenic substrate, releasing the yellow color that can be measured at 405-410 nm with an incubating absorbance reader.

Kinetic-QCL® Kinetic Chromogenic LAL Assay Kits

Our Kinetic-QCL® Kinetic Chromogenic LAL Assay kits have a sensitivity range from 0.005 to 50 EU/ml. These kits contain co-lyophilized lysate/substrate and matched control standard endotoxin. Bulk kit configurations are also available. Kinetic chromogenic lysate and matched control standard endotoxin are packaged separately but should be ordered together. The chromogenic nature of the assay makes it the most appropriate choice for testing small volume parenterals, vaccines, antibiotics and biologicals. It is also ideally suited to testing inhibitory products, which may interfere with the clotting mechanism in turbidimetric and gel clot LAL assays.

See our Kits

eLearning Module: Working with photometric assays

This module covers the basic principles of working with photometric methods, includes a demonstration assay video and sections on calculating the MVD, product characterization, product validation, and routine testing.

Visit QC Insider®

Kinetic Turbidimetric LAL Assays

Turbidimetry measures the presence of solid particles in an otherwise homogeneous solution (the turbidity). The general procedure involves measuring the wavelength of light passing through the solution using spectrophotometric methods. This reveals the concentration of the substance and the substances present in the solution that are causing the turbidity.

In turbidimetric LAL tests, the LAL reagent is added to the test sample to make a solution. If endotoxins are present in the sample, then the clotting reaction of the LAL reagent produces a solid mass (i.e., the clot or gel) in the solution. The resulting degree of turbidity is subsequently measured to determine the presence and amount of endotoxin.

Assay principle

The enzymatic cascade for the kinetic turbidimetric assay is nearly identical to that of the gel clot assay. The cascade ultimately results in the formation of coagulin which is detected as the appearance of turbidity.

PYROGENT® 5000 Kinetic Turbidimetric LAL Assay Kits

Our PYROGENT® 5000 Kinetic Turbidimetric LAL Assay kits have a sensitivity range from 0.01 to 100 EU/ml. Kits contain turbidimetric lysate, reconstitution buffer for the lysate and matched control standard endotoxin. Bulk kit configurations are also available with the three assay components packaged separately. This method is commonly used by laboratories needing to process large numbers of samples. It is also ideal for water samples, large volume parenterals, and water rinse from medical devices. 

Kinetic LAL Assay Quick Guide

A step-by-step guide depicting how to perform a traditional kinetic LAL assay.

Gel Clot LAL Assay

The gel clot LAL assay is the simplest form of the LAL assay and can easily be carried out in most laboratories. It provides an easy to read qualitative result indicating the presence or absence of endotoxin in the test sample. It is most often mentioned as the official referee test in pharmacopeial monographs.

The gel clot LAL assay involves mixing the LAL reagent with the test sample in a tube, which is then incubated. If endotoxin is present in the sample, the clotting response by the LAL reagent will be initiated. After the incubation period, the tube is examined by eye to determine whether a clot (or gel) has formed at the bottom of the tube. A positive result is indicated by the presence of a clot which stays at the bottom of the tube upon gentle inversion, whereas a negative result is indicated by liquid flowing down the inside of the tube.

Assay principle

The first stage of the gel clot LAL assay is the binding of endotoxin by a key protein, known as Factor C. Factor C is an inactive protease that becomes activated once bound to endotoxin. Activated Factor C, then acts on another inactive protease, Factor B. Activated Factor B in turn activates a pro-clotting enzyme. The proclotting enzyme becomes the clotting enzyme. Coagulogen in the presence of the clotting enzyme becomes coagulin – which forms the clot.

PYROGENT® Gel Clot LAL Assay Kits

We have developed convenient gel clot LAL assay kits that each offer different endotoxin detection limits, kit configurations and standard and bulk kit formats. Our standard PYROGENT® Gel Clot LAL Assay Kit is offered in different sensitivities of 0.03, 0.06 and 0.125 EU/ml. These kits do not include a matched control standard endotoxin, but this can be ordered separately.

Our PYROGENT® Plus Gel Clot LAL Assay Kit is also available in different sensitivities (0.03, 0.06, 0.125 and 0.25 EU/ml) and is supplied with matched control standard endotoxin. 

eLearning Module: Working with the Gel Clot Assay

This module describes how to perform the gel clot assay, including calculation of the Maximum Valid Dilution (MVD), product validation and the Initial Qualification (IQ) assay.

Assay selection guide

An interactive tool that guides you through a series of simple questions that help you determine which endotoxin detection kit is best suited for your testing needs.

QC Insider® Toolbox

Improve your endotoxin testing knowledge and skills with eLearning modules, webinars, presentations and other materials.
 

Endotoxin detection - Which method is best for me?

This presentation covers the difference between the various endotoxin assays and which assay type best fits your needs.