The 96-well ShuttleTM Software is the graphic user interface required for running the NucleofectorTM 96-well ShuttleTM System. It is used to setup a 96-well Nucleofection experiment, control the execution and save the results. The 96-well ShuttleTM Software is pre-installed on a laptop provided by Lonza together with the 96-well ShuttleTM Device.
Software Updates
Due to new Optimized Protocols added to the Lonza Program list or technical improvement of the operation software, your 96-well ShuttleTM Software may require an update of its program list or the whole firmware.
Do I work with the most recent version?
To check if the software version of your system is the most recent one, please open the PC software and go to “Version > Details” and check the entry under “PC Software version”.
Current version: 2.16b - Download
In case a re-installation of the 96-well ShuttleTM Software is required, you may use the USB Stick (or formerly CD) that was originally provided with the system or download the most recent version above.
Update Instructions: For (re-)installation, follow the installation wizard (process description)
Note: The software may be installed on other computers owned by the user. Installation and use of the software is at the user’s own risk, and Lonza assumes no responsibility for any computer or internal network server and / or data damage arising from or in connection with the use of the software.
An update of the PC software might be connected with an update of the firmware of the other system components (NucleofectorTM and/or 96-well ShuttleTM Device). The PC software always does a compatibility check for the connected devices and includes an update functionality. Thus, it is recommended to always use the latest PC software version to avoid system incompatibilities.