The 384-well NucleofectorTM Software is the graphic user interface required for running the HT NucleofectorTM System. It is used to setup a 384-well Nucleofection experiment, control the execution and save the results. It also comprises the interface for running the system in an automated environment under control of a liquid handling system. The 384-well NucleofectorTM Software is pre-installed on a laptop provided by Lonza together with the HT NucleofectorTM System.
Software Updates
Due to new Optimized Protocols added to the Lonza Program list or technical improvement of the operation software, your 384-well NucleofectorTM Software may require an update of its program list or the whole firmware.
Do I work with the most recent version?
To check if the software version of your system is the most recent one, please open the PC software and go to “Version > Details” and check the entry under “PC Software version”.
Current version: 2.11 (download )
In case a re-installation of the 384-well NucleofectorTM Software is required, you may use the USB Stick (or formerly CD) that was originally provided with the system or download the most recent version above.
Update Instructions: For (re-)installation, follow the installation wizard.
Note: The software may be installed on other computers owned by the user. Installation and use of the software is at the user’s own risk, and Lonza assumes no responsibility for any computer or internal network server and / or data damage arising from or in connection with the use of the software.